Palmer Energy Systems

Magnum Accessories

Smart Battery Combiner (ME-SBC)

The Front panel Includes:
LED indicators showing status and operation.
Three adjustable voltage dials to set the "Connect Voltage",
"Low V Disconnect", and "High V Disconnect."
An oversized power terminal block allowing for easy wire
connections even if the wires are large.
An accessories terminal block to add a solenoid or a separate
voltage sense line.
A reset switch.

Features:
Voltage auto-detect feature recognizing 12 or 24 VDC.
Transfers up to 25 amps.
Solenoid drive for requirements greater than 25 amps.
Over-temperature and over-current shutdown.
Adjustable voltage settings with a wide range allows for
charging flexibility.
Bi-directional charging.
Reverse polarity protection.
Sense lead for long-run applications.

MSRP    Our Price

$129        $109

FREE SHIPPING!!!!

(941) 928-4573

E-mail:john@palmerenergysystems.com

Battery Monitor Kit (BMK)

Kit includes:
Sense module
DC shunt 50mv/500 amp shunt
Twisted pair wire 5’ length, 18 AWG wire
Communication cable 10’ length, 2-conductor, telephone standard

Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-RC remote. With accurate SOC readings, you can avoid unneccessary battery recharging, saving on fuel and long-term maintenance costs.

If you already have a Magnum Inverter/Charger and Magnum Remote*, the ME-BMK is an easy retrofit. Simply install the kit according to the installation manual and begin monitoring your battery bank via the “Meter” button on your ME-RC.

Available readings from the ME-BMK:
State of Charge (SOC) 0 - 100%
Total amp hours out
DC volts
Minimum volts DC
DC amps
Maximum volts DC
Amp hours in/out
Temperature compensated
Resettable amp hours out
Auto detects input voltage

MSRP    Our Price

$189        $160

FREE SHIPPING!!!!

(941) 928-4573

E-mail:john@palmerenergysystems.com

Remote - ME-RC

The Magnum Remote is designed to be simple to use while offering full menu features for set-up.

Easy-to-read:
The large LCD screen and at-a-glance LEDs display the inverter/ charger status in a straightforward way. Soft keys give simple access to menus and a rotary encoder knob makes it easy to quickly scroll through menus and select settings.
Non-volatile memory:
Critical settings are saved even if the power is disconnected.
No cross platform confusion:
The ME-RC remote is the same remote used on all Magnum inverter/charger models in the ME, MS, MS-AE, RD, MM, and the MMS Series lines.
Multiple functional settings:
The Remote offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus.
Adjustable settings include shore power input from 5 to 60 amps; AGS settings for voltage, temperature, quiet time, clock, and status; inverter and charger settings for search watts, battery bank size, battery type, charge rate, VAC dropout, contrast, and power saver; and tech settings for battery temperature, transformer and internal FETs, software revisions, and factory reset.
Voltage auto-detect feature recognizing 12 or 24 VDC.
A standard 50’ 4-wire, twisted pair cable allows for plenty of room to display the Remote with ease.

MSRP    Our Price

$229        $195

FREE SHIPPING!!!!

(941) 928-4573

E-mail:john@palmerenergysystems.com

Remote - ME-ARC

The ME-ARC is simple to use, yet allows full set-up of all the standard and advanced features available in Magnum inverters. The ME-ARC also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.

MSRP    Our Price

$299        $255

FREE SHIPPING!!!!

(941) 928-4573

E-mail:john@palmerenergysystems.com